Tag Archives: rogue bar

Rogue Fitness Matt Chan Barbell (Boneyard Bar)

The Rogue Chan Bar – I finally got my hands on one of the most popular barbells that Rogue makes, that I haven’t reviewed yet. The bulk of the barbells Rogue puts out nowadays are just a variations of the Ohio bar with coating differences. For the most part, they all use the same 190k PSI tensile strength shaft, bronze bushings (though many are going composite), they’re 28.5mm in diameter, and they all have the same knurl pattern; though some might disagree on that last one. There are a few things remain the same with the Chan bar, but it also has the biggest differences from the Ohio, enough to make it my personal favorite Rogue “multi-use” barbell.

IMG_9955

Construction/Build Quality

Like all Rogue products, the Chan bar feels over-engineered. Almost no other equipment in the world have the polish that Rogue products do. As previously mentioned, the shaft is the typical Rogue 190k PSI tensile, 28.5mm diameter shaft forged right here in the US of A. With that, you get Rogue’s limited lifetime warranty against bending or breaking, which I honestly don’t think you’ll ever use; I’ve never heard of any of their bars bending. Hell, even my older Rogue bars that had imported shafts are all straight as arrows.

On the contrary to what the Rogue website says and what people think they know, the Chan bar has the same knurl pattern as all of Rogue’s 28.5mm barbells. To be fair, I think all of the other bars adopted the Chan bar’s knurling when they all switched over to the 190k PSI shafts. Personally, I think Rogue’s knurling is more on the medium side of things; it’s definitely not as deep and coarse like a power bar but it can for sure give you some hot spots on your hands. You don’t need a ton of chalk to get a sure grip and it’s still probably the most well rounded knurling I’ve used for everything you’d possibly want to use this bar for.

IMG_9950

The sleeves are typical Rogue sleeves, one inch shoulder with 16.5″ of loadable space. The surface of the sleeves have a very fine machining to help keep plates on, but I would still make sure to use clips when loading. Each sleeve has two cast bronze bushings, not sintered Oilite bushings, but ones that are made in house. Spin is smooth and there isn’t a ton of play when you try to move the sleeve side to side, giving you a nice solid thud when the bar is dropped.

IMG_9952

Performance

Because Rogue uses the same shaft in all of their multi-use barbells, if you’ve used one of them, you’ve used them all. Don’t take this as a bad thing though, Rogue barbells are the most reliably performing bars on the market. They don’t excel in one area, but they’re very good all around. If you just want to squat, bench or dead, you’ll probably want to look into a power bar. If you want to improve your oly, maybe check out their training bars. If you want to do all of those things, get an Ohio bar variant. The 190k PSI shaft has good enough whip to satisfy most weightlifters, without being overly dynamic for the slow lifts such as your press or squat. Spin, once again is smooth and more than fast enough for oly, but not over the top for presses. Some might hate that I use the term “CrossFit barbell”, but Rogue’s multi-use bars are the quintessential CrossFit barbells.

Practical features are what differentiates the Chan bar from it’s brothers. This bar has a smaller clean grip knurl area and passive center knurling. The purpose of cutting the clean grip knurling short is so that when you pull, your shins are free of any knurling, potentially saving you from racing stripes up your shins. It also makes for quicker setups, assuming you use the same width grip that Matt Chan uses; which most of us probably do. The only instance this was a little bit of a problem for me was for my deadlift grip, which is typically right at the start of the knurling. I’d take adjusting my grip a little bit over tearing my shins up any day though.

IMG_9951

Center knurling is a taboo subject in the CrossFit world, but when done correctly, I’d almost always want a bar that has it. The Chan bar has some of the best execution of center knurl that I’ve come across; it’s not even a quarter of the depth of the grip knurling, more like a light texturing to the middle of the bar. It’s light enough to not tear up your collar bone, but substantial enough to give you added stick to your chest or back when cleaning or squatting. Don’t be scared of center knurling folks, it can be a good thing.

IMG_9949

Value/Conclusion

The Chan bar only comes in one flavor at the moment, black zinc shaft with black zinc sleeves and retails for $295. At one point they had a satin chrome version that retailed for $350, but I’m not sure we’ll ever see that come back. Sure, you can get the Ohio bar for about $10 less, but personally I’d pay the difference for the thoughtful grip knurling and center knurling, not to mention the awesome end cap. You can get this bar for a real steal if you’re patient enough to keep checking out Rogue’s boneyard section. I picked up my Chan bar for $195+$15 shipping and tax leaving me at about roughly $230 out the door. You’d be hard pressed to find any defects (I couldn’t), but sometimes you might not end up with coating in some areas. As long as the shaft is zinc, I wouldn’t worry too much about the sleeves being bare steel. In that case, I think this is one of the best deals in barbells at the moment.

I wish I didn’t wait so long to get a Chan bar, it actually could have been my first barbell ever if I wasn’t scared of the center knurling. The adjustments to the knurling and addition of center knurl make it, in my opinion, the best of the Ohio bar clones and the best “CrossFit” bar that Rogue makes. Remember with any barbell you get from Rogue, you can’t go wrong.

Get your Rogue Matt Chan Bar here!

Advertisements

Rogue Fitness Stainless Steel Ohio Bar Review

IMG_7050

I’ve owned just about every iteration of the Rogue Fitness Ohio Bar. My first being the black oxide 1.1, and since then, a few more black zinc 1.1’s and 1.2’s; even the Operator bar and Echo bars can be counted as spin off versions of the Ohio.  The only real drastic change in the Ohio bar since it was first conceived was the tensile strength going from 155k psi to the current 190k psi. Besides losing the option to get a chrome version of the bar, mainly everything everything stayed the same. Still, 3 years later the Ohio bar remains arguably the most popular barbell in the world. Partly because the name behind it, but mainly because it just works for just about everything and everyone. The latest version of the ever popular barbell brings some useful features but also a questionable “downgrade”, at a moderate premium in price.

The shaft largely remains the same, but now has a 195k psi tensile strength rating, probably due to being made from stainless steel. In the real world, that 5k increase really isn’t going to do a ton in the way of durability, but anything above 190k should be able to stand up to just about anything you can throw at it anyways. The stainless steel Ohio bar came to me extra dirty, but at least it wasn’t too greasy when it arrived. Stainless steel is unmatched in feel by any coating, as it’s basically like having a bare steel barbell. If you’ve never used either types of barbells before, they have a chalky feel to them, unlike zinc or chrome. Though the shaft is stainless, the sleeves are still coated with chrome. Rogue’s website says something about not using a steel wire brush to clean the SS Ohio bar because it can cause rusting. I’m going to assume this is the same reason they went with chrome sleeves instead so that bumper plate collars aren’t going to be rubbing and causing rust issues.

IMG_7048

Since it is the Ohio bar, the shaft remains the 28.5mm multi-use bar standard diameter. Don’t expect this to ever change, but at least they’re going to be releasing stainless versions of multiple bars in their line-up, including a 28mm (Ohio?) training bar. Still, 28.5mm remains a popular pick because it can fit in with just about everything you’re planning to do. If you’re a dedicated weightlifter, get a 28mm bar, it makes a difference.

Arguably the best feature of the stainless steel shaft is the fact that it’s provides the knurling the exact feel the Rogue engineers designed it to have. With bars with coating, the knurling is cut, then the coating is laid on top of the bar, bastardizing the knurling to some degree. As always, Rogue knurling is the most uniform and well cut knurling on the market with a pattern designed to satisfy most people. I say this because I have plenty of friends that think Rogue’s knurling is too aggressive, but many would beg to differ. Personally I think it’s more towards the medium depth spectrum – after getting used to it, the knurling will be tolerable to use for high rep work but at the same time it’ll be grippy enough to use for powerlifting and weightlifting singles. Vary rarely do I ever feel the need to use excessive amounts of chalk. At this point, I love Rogue’s current knurling but there was definitely a break in time for my hands.

IMG_7045

As with my first Ohio bar and those that followed it, the sleeve spin isn’t anything to write home about. When I first experienced this, it was a major letdown, but over time I’ve learned that free spinning a sleeve isn’t actually indicative of how well it will spin under load. Ohio bars have always had very smooth and consistent rotation with their bronze bushings and the SS Ohio is no different; you have nothing to worry about as long as the sleeves spin without seizing, . Rogue decided to go with the same composite bushings that they use in their Rogue Bar 2.0. Performance feels the same between bronze and composite bushings, but durability is questionable. Composite should actually cut down on friction between the bar and sleeve by reducing metal to metal contact, assuming the bushing itself lasts that long. In my Rogue Bar 2.0, one of the bushings has flattened out after so many drops, to the point where I have had to pull the excess of it off the bushing.

IMG_7047

Even though spin between composite and bronze bushings is very similar, I think this change is a huge mistake. I can’t be the only one that sees the stainless steel version of the Ohio bar as a premium version of an already premium product, also with a premium price tag, so taking away a “premium” feature like bronze bushings is just ridiculous. Keep in mind this is exactly what separates the not so premium Rogue Bar 2.0 from the “premium” Ohio bar; even Echo bars have bronze bushings.

Performance remains largely unchanged from generation to generation of Ohio bars. That’s kind of what makes the Ohio bar what it is and why it’s popular. It’s a jack of all trades, master of none kind of barbell. The spin isn’t amazingly fast, the whip isn’t very dynamic and actually feels slightly stiffer than it’s original models. Still, the Ohio bar will handily do anything you ask of it, and that’s exactly what most people need/want. If you want a stiffer bar for squatting and pressing, get a power bar. If you want a whippier bar for olympic lifting, get a training bar. The Ohio bar is the perfect multi-use/CrossFit/functional fitness barbell.

IMG_7051

So, why drop the extra cash on the stainless steel Ohio bar when you can get a normal one with bronze bushings for about $75 less? The main draw, and really the only reason you should buy the stainless bar, is it’s corrosion resistance. Unlike it’s counterparts that will eventually lose their protective coatings and rust, stainless steel will never have that problem because it doesn’t have a coating. Corrosion resistance is a spectrum and stainless is at the top, though it’s not completely immune to rusting – it will just take much, much more for it to start to oxidize. Being near Los Angeles this really isn’t an issue (no, we don’t all live by the beach). I spent the last couple weeks using the SS Ohio bar as my daily driver, not worrying about knocking the chalk out of it or wiping it down, and it looked as good as new when I did.

If you’re in the south, where humidity runs rampant a good chunk of the year, this bar is made for you. Garage gym enthusiasts might also want to look into the SS Ohio bar since their bars will be more exposed to the elements. Hell, this might be a good choice for you even if you’re just too lazy to maintain your barbells. If you don’t fall into any of these categories, you’re better off saving your money by purchasing the tried and true version of the Ohio bar.

Get your Rogue Fitness Stainless Steel Ohio Bar here!

Vulcan Standard 28mm Training Barbell 20kg

DSC06874

Quite some time ago now, I blindly picked up a barbell from a company I didn’t know a whole lot about named Vulcan Strength. I admit, at the time I was much more of a noob about equipment than I am now. Honestly, I don’t even remember how I came about finding out about Vulcan in the first place, but I remember being dazzled by their “Standard” barbell. It was and still is, one of the few U.S. made barbells that isn’t Rogue, American Barbell or Diamond Pro. That alone gave it a certain allure, but the performance quickly made it one of my favorite and most recommended barbells.

If there was anything “wrong” with the Vulcan Standard; it was that the shaft was 28.5mm in diameter making it more of a “CrossFit” bar (I’m a crossfitter), and less of a training barbell. Which could be fine for you purposes depending on what you’re looking for.  I also think it’s kind of weird when 28.5mm bars only have a WL marking, but Vulcan must have read my review and not too long after the PL marking was added in; I guess the same could be said about 28mm bars with PL markings! The original 28.5mm Standard is still available, but you now also have the option to go with a true 28mm Training Bar under the same moniker.

DSC06875

  • 28mm diameter shaft with nickel chrome coating and a single IWF marking.
  • 196k PSI tensile strength.
  • Medium depth knurling.
  • Oil impregnated bronze bushings with bright zinc sleeves.
  • Made in the U.S.A.
  • $345 with Free Shipping
  • Lifetime Warranty

Many of the specifications of the original Standard carry over to the training bar other than a very slight jump in tensile strength. This is not a bad thing as the original Standard was a great barbell due to many of these attributes. The same good ol’ American made build quality still stands as well; the Training bar is one of the most sturdy sounding bars when dropped. A more significant change is the difference in price, but more on that later on.

DSC06877

As with the original Standard, rotation is aided by a set of bronze bushings per sleeve. Spinning the sleeve freely without weight surprisingly doesn’t produce as many rotations as the original Standard did. We all know by now that spinning the sleeves like that doesn’t mean much to the actual performance of the bar. On the contrary, the bronze bushings found in the Standard Training bar allow for buttery smooth rotations under any kind of load. Since the bushings are sintered, rotation should actually get better with use and last you quite some time before having to re-lubricate. If you wanted “wow” factor, you could opt for the bearing variant!

Out of the box, Vulcan uses a much thicker grease lubricant to protect the bar from it’s own tight tolerances. This reduces metal to metal contact, resulting in less wear over time and a “looser” barbell. Other manufacturers will use a thinner type lubricant to make the bar spin better out of the box, but not necessarily to safeguard the barbell.

Tensile strength has changed from the 194k psi tensile to a 196k psi tensile, which does mean that the metallurgy of the steel has been altered. It’s interesting to see that the thinner shaft has the higher strength between the two, but the hike in tensile strength doesn’t do anything to the dynamic properties of the barbell. Most barbells in this range usually have an adequate amount of whip for most people but should increase as the weights go up.  I found that the Training bar feels a lot like the Standard I remembered in this area. You start to feel the bar move around 100kg, but not enough to make a difference. YMMV if you’re a big boy/girl lifter!


DSC06870

Vulcan’s nickel chrome coating is blingin’. Aesthetically, the Training bar is beautiful, but that’s probably not the reason you’re buying it. Chrome is great against chipping and scratching but remember, oxidation can still happen. Though I haven’t experienced any issues with this being from SoCal, you can expect this to happen in the most humid of environments. You can count on the shaft looking great for years to come if taken care of properly. I always recommend keeping a nylon brush near by to knock the chalk out of your knurling. The polished shaft is without center knurling but you shouldn’t have any issues with it slipping off your chest, as I felt it actually caught my sticky skin instead.

Vulcan is one of the only manufacturers to actually tout they have a medium depth knurling; I think companies stray away from this because they’re afraid that it might cost them some bar sales, but over the years I’ve notice a trend of people that actually want a more aggressive knurl pattern. I remember the original Standard not having a very aggressive knurl, which I personally liked, but the Training bar’s knurl is much more aggressive than it what it once was. Knurling is the most subjective thing when it comes to choosing a barbell; what I like, you might not, and vice versa. However, I actually find the Training bar’s knurling to be quite comfortable, even for reps. The pattern is a bit more fine, but also deeper and provides excellent grip even without having to chalk up. Fans of more aggressive knurling will revel at the touch of the Training bar’s knurling.

DSC06867


The Standard Training bar will set you back a cool $66 more than the OG ($345 vs $279), which is a considerable amount more. If you’re a dedicated weightlifter, this is a no-brainer, you need that 28mm shaft! From a Crossfitter’s point of view, you might be just fine saving a little bit and going for the original Standard. You can sure as hell perform Oly movements just fine with the OG just as well as you can do WOD’s with the Training bar. They’re still both excellent and it mainly depends on your budget, but I would always opt for the 28mm barbell.

For the price, there are other great barbells, so I think it mainly comes down to what your preferences are with knurling.  There are no wrong answers in this range of barbells, but if you’re looking for a good ol’ American made 28mm training bar with a real medium depth knurling, is built like a tank and should last you for years to come, look no further than the Vulcan Standard. If theres anything I know about Vulcan, it’s that they have an insatiable need to put out the the best quality gear out there; you can shop with confidence.

Get your Vulcan Standard Training bar here!

Rogue Fitness Rogue Bar 2.0 Drop Durability Test!

Does dropping barbells without weight actually break them? In this video we go against the age old box rule of not dropping barbells without weight and put the Rogue Bar 2.0 through a series of drops. The results might surprise you!

Graphic content, viewer discretion is advised.

$300 CrossFit Barbell Buyer’s Guide

In this not so short video, I go over a few barbells that you should look into when shopping for your first barbell. All of these are under $300 (not including shipping/tax), which is a great price range to get a nice barbell, and perform excellent in their own rights. Some are better for weightlifting, some are mixed use, but all are great barbells that you could use for CrossFit in either the garage gym or affiliate atmosphere.